What is the reason for the faucet dripping?

1; The old faucet in the house is not tight, it has been leaking, and the basin will soon be filled with pots. This is too wasteful! Here's to give everyone a look at science, tap water leakage is how is it?

2; If it is leaking around the spool, most of it is because the spool is loose or the position of the spool has changed. Just remove the spool and reinstall it.

3; The gap in the lower tap leaks.

This is caused by the abrasion of the triangular gasket inside the faucet. The screw can be loosened and the faucet can be disassembled. The internal triangulation gasket can be removed and replaced with a new one. The problem is solved.

4; Faucet plug under the gap out of the water is mainly due to wear caused by, but this situation is due to the gland inside the seal wear caused. This problem is not difficult to solve. After unscrewing the screws, remove the head and remove the cover to replace it with a new one.

The water from the joint is caused by the loosening of the cap nut. Simply replace the capped nut or U-seal.

5; Leakage caused by the sealing ring of the faucet.

The sealing ring of a faucet is composed of a plurality of rubber rings. Loosening of the sealing ring can also lead to water leakage.

6; When we use the faucet every day, no matter where the faucet do not have to use too much effort to close, just gently rotate, too much effort to turn off but will damage the faucet.

When installing the faucet, be careful not to touch it, and be careful not to put impurities such as cement on it. If the original gloss of the faucet is damaged, the faucet will easily break.

7; The valve seat of the faucet has a problem.

Due to the long-term use of faucets, the valve seat inside the faucet accumulates too much chemical substances in the water. The accumulation of these materials gradually corrodes the valve seat over time, and as time passes, the valve seat will be damaged and cause water leakage.