Shower door and handle installation

After the main frame is installed, the next step is to install the sliding door and handle. The importance of sliding the door is self-evident, installation must be careful, must be after debugging, to ensure smooth sliding, and no closure from the closure.

1. Installation of Sliding Wheels Generally, the holes for installing the wheels have been reserved on the sliding door glass. The sliding door needs to use the pulley. Firstly, two wheels above the upper sliding door must be installed. After the wheel is mounted on the wheel, place it in the corresponding position, and then debug and install the lower wheel.

2. After the fixed sliding door is placed, it needs to be fixed. Fixing does not mean that it cannot move at all, but it does not let it out of the frame. The fixing method is still the same. Use pliers and a screwdriver to fasten the connectors.

3. After the debugging of the sliding door is installed, there must be no debugging. Try to check whether the sliding door is open and closed smoothly and whether it is closed or not. If there is a gap, you need to take a good approach to debugging.

4, install the sliding door handle sliding door also need to install the handle, handle installation is relatively simple. First separate the handles, then align the holes in the glass and secure them with screws.

5. After the basic installation of the glass glue Shower room at the crevice is completed, waterproofing is required. The use of glass glue sticks, in the aluminum frame and wall, etc., coated with glass glue, can effectively prevent future water permeability.