How To Install The Kitchen Faucet

In life, the kitchen is the space we use every day, and the Kitchen Faucet has a heavy responsibility. With the tap, we can cook a variety of delicious food. So, the kitchen faucet is the only appliance that solves our daily life. So, how to buy a kitchen faucet? What is the kitchen faucet installation ?

Kitchen faucet installation

A kitchen faucet with a single hole kitchen faucet

Because kitchen mixers are used more frequently, they are required to be stable. In addition to being moved around, it is easy to loosen, so the locknut must be tightened. At present, there are some faucets on the market that use nuts to fasten the nuts. This kind of stability is very good. If you can solve the problems of removing water, it will be a popular trend in the future.

Single cold on the stainless steel basin, as long as fixed and then connected to the two 4 teeth on the end of a hose connected to the angle valve on the head under the faucet on the hot and cold like just a lot of water.

There are several types of taps: single cold, mixed hot and cold. The single cold is very simple, directly on the wall of the pipe head, if it is mixed hot and cold, it should be clear that the wall of hot and cold water pipes, usually left hot right cold.

The faucet is still quite elaborate, for example, consider children cooking at home, and taps should be installed lower. In order to prevent the water from flowing down the sleeves of the clothes to wet the clothes.

Kitchen faucet installation II. Installation of thermostatic faucet

Before installing the thermostat, please check whether the water pipe is hot or cold. Remember not to connect the hot and cold water pipes incorrectly to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Do not forget to install the hot and cold water filter when installing the thermostat.

Kitchen Faucet Installation Three, Single Hole Kitchen Faucet Installation

The requirement is stable, because the kitchen mixer is used frequently, and it is easy to loosen and move it. Therefore, the lock nut must be tightened. At present, there are some faucets on the market that use nuts to fasten the nuts. This kind of stability is very good. If you can solve the problems of removing water, it will be a popular trend in the future. Ready to install tools, check whether the complete set of accessories before installation, common faucet parts are: hose, rubber gasket, Shower, go to water, kidnappers, decorative caps and so on.

Kitchen faucet installation four, accessories preparation

1, a full set of fixed bolts and fixed copper sheets and gaskets;

2, a full set of basin to pull the water heater;

3, two inlet pipes. Then remove the faucet, pull the handle up and down, feel the open and close, and feel light and smooth, with a gentle and even sense of blockiness. The next step is to check that the plating surface is bright, free of bubbles, spots, and scratches.